- 閱讀權限
- 30
- 最後登錄
- 17-4-19
- 精華
- 0
- UID
- 82281
- 帖子
- 69
- 積分
- 556
- 註冊時間
- 03-6-24
- 在線時間
- 9 小時
- UID
- 82281
- 帖子
- 69
- 積分
- 556
- Good
- 0
- 註冊時間
- 03-6-24
- 在線時間
- 9 小時
|
本帖最後由 fatau 於 11-10-26 04:53 PM 編輯
我2010年頭用2130n到前排轉左rv220w
可以話...rv220w bugs多到嘔
八月份出o既firmware入面 known issue
http://www.cisco.com/en/US/docs/ ... e_Notes_1.0.2.4.pdf
Date Revision
Oct. 13, 2011 Added a known issue: The number of QuickVPN Client users
supported is limited to 10 instead of 25
Known Issues in Version 1.0.2.4
• The number of QuickVPN Client users supported is limited to 10 instead of
25.4 Release Notes for RV220W Firmware Version 1.0.2.4
Release Notes
• A 6to4 tunnel may encounter packet loss depending on the type of NIC
used.
• When Internet Explorer version 9 is used, the Status > View Logs page does
not include line breaks between system log entries.
Work Around: Use Firefox or Chrome to launch the Configuration Utility.
• On the Administration > Firmware Upgrade page, the Firmware Last
Updated field is blank.
• SSL VPN is not working for users whose computers are running Windows 7
64-bit.
Work Around: Use Windows XP 64-bit or Windows 7 32-bit.
• If a client has its IP address bound to a MAC address in the IP/MAC Binding
table, firewall rules/filters enabled for the client no longer work. All traffic is
allowed to pass through this client even though IP blocking/filtering for the
client is enabled on the RV220W.
Work Around: Do not use IP/MAC Binding for a client that has firewall rules/
filters assigned to it.
• The following GUI configurations require restarting the RV220W:
- Changing the time zone to use an NTP server.
- Manually setting the time.
- Enabling and configuring remote management.
• The online help file for Wi-Fi Multimedia (WMM) should read “WMM: Opens
the QoS Configuration page to edit the QoS configuration parameters for
this profile.”
• SNMP MIBs only support Read access.
• VPN connectivity can be lost when using SSL VPN port forwarding and
later versions of Firefox.
Work Around: Use Internet Explorer or Firefox version 3.6.17.
• WLAN clients fail to connect to the router using WPA Enterprise or
WPA2 Enterprise.
Work Around: To work around this issue, disable the Block Fragmentation
option in the Firewall page.
• Known open issue with enabling the Aggressive mode for IPSec VPN.
Work Around: Use the Main mode instead.
• The DHCP Client Table does not show all clients. Release Notes for RV220W Firmware Version 1.0.2.4 5
Release Notes
• NTP stops working after upgrading from firmware version 1.0.1.0 to 1.0.2.4.
Work Around: Factory reset the router.
• Certain Syslogs such as IKE and Kernel logs will be shown with the time
stamp of 2000-01-01 and not the current time.
• The Syslog does not always list the timestamp in sequential order.
• The router fails to apply trusted or self-signed SSL certificates to HTTPS
sessions. Although on-screen messages indicate that the certificate was
successfully added, the router uses the original default certificate for
subsequent HTTPS connections.
Work Around: The router will use a certificate that is signed by root CA. You
can generate a Self Certificate Request from the router and have it signed
by the root CA. Upload the root CA certificate in the Trusted CA Certificate
table. Finally, upload the signed certificate in the Active Self Certificate
table. See the Security > SSL Certificate page.
• Internet NAT redirection does not work using firewall port-forwarding rules.
A LAN client cannot access a service by using the WAN IP address of the
LAN device (such as an IP camera or an FTP server).
Work Around: Do not use the Firewall > Port Forwarding page, but instead
create the forwarding rule by using the Firewall > Access Rules page. The
working port forwarding entry is created along with the firewall access rule.
• A critical error is encountered when attempting to configure settings for
remote logging to a syslog server.
Work Around: Enable email logging on the Administration > Logging >
Remote Logging Configuration page.
• A client cannot connect via SSLVPN with a corporate proxy setting.
Work Around: Disable the proxy setting or set the proxy using the IP
address instead of the domain name. For example, in Internet Explorer,
adjust the proxy settings by going to Tools > Internet Options. Click the
Connections tab, and then click the LAN settings button. Proceed as
needed:
- To disable the proxy, uncheck the Use a proxy server box and then
check the Automatically detect settings box. Click OK to save the
changes, and then click OK to close the Internet Options window.
OR
- To identify the proxy by IP address: Check the Use a proxy server
box, delete the domain name if in use, and enter the IP address of the
proxy server in the Address box. 6 Release Notes for RV220W Firmware Version 1.0.2.4
Release Notes
• There are issues with the SSL VPN client installer on Internet Explorer 8.
Work Around: Adjust the settings in Internet Explorer as described below.
1. In Internet Explorer, go to Tools > Internet Options.
2. Click the Security tab, and then click the Custom Level button.
3. Scroll down to ActiveX controls and plug-ins.
4. For Automatic prompting for ActiveX controls, click Enable.
5. For Download signed ActiveX controls, click Enable.
6. Click OK to save the changes, and then click OK to close the Internet
Options window.
• A client cannot connect via SSLVPN when using MacOs+Java 1.6.0.26.
Work Around: Downgrade Java version and use FireFox version 3.16.
Follow the procedure described below to downgrade Java and Firefox.
1. Login to your MacIntosh computer as administrator.
2. Start the terminal: Finder> Applications > Utilities > Terminal.
3. At the command prompt enter these commands:
user1% sudo passwd root
Enter Password:
Changing password for root
New password:
Verify password:
The “root” account is enabled after the above steps.
4. Log out of your current account.
5. Re-login and at the prompt, enter your “root” username and password
that you've just created.Release Notes for RV220W Firmware Version 1.0.2.4 7
Release Notes
6. Check Java version: Finder> Applications > Utilities > Java Preferences.
If Java version is 10.6.0.24 or higher, go here to download and then install
earlier version of Java: http://www.uploadstation.com/file/a44a57U/
JavaforMacOSX10.6Update1Downgrade.zip
If the install is successful, continue to the next step. If your computer
does not allow to install of older Java version, open a Terminal session
(Finder> Applications > Utilities > Terminal) and enter these commands
to bypass checking Java version during installation:
root% cd /System/Library/Frameworks/JavaVM.framework/
Resources
root% mv Info.plist Info.plist.orig
root% mv version.plist version.plist.orig
7. Download FireFox v3.16 for MacOs from this site:
http://www.mozilla.com/en-US/firefox/all-older.html
8. Install the FireFox 3.16. (Enter “root” password if asked)
9. Open the FireFox browser, and log into the router as SSLVPN user. The
portal page appears |
|
樓主: civiclau
發表於 11-10-10 11:44 AM
發表於 11-10-10 03:58 PM
發表於 11-10-10 05:46 PM
(我唔係好明哩個smallnetbuilder網會TEST到有咁高分數),所以綜合穩定性,速度及價錢,性價比2130n係最高,而都係我多日來再各大網站(包括埋呢度)所收集到既最終結果
發表於 11-10-11 03:07 AM
, 不過2130N無左保, 而RV220W用左個幾月)
哩點攪到要用QNAP NAS做WOL+ SSH 叫起電腦 麻煩左D